Skip to the page
A long hotel corridor lined with doors

Fire Door Repair Company

Gaps, closers, seals and signage put right after your quarterly checks, door by door, for blocks, schools and offices.

Get a quote

Eight faults that fill a fire door report

The government's fire door guidance lists what counts as a fault. These come up on almost every survey of a block or a school, and most are repairs rather than new doors.

Gaps
Wider than 4mm at the sides or head, or a door that binds.
Seals and strips
Painted over, torn or missing intumescent strips and smoke seals.
Closers
A door that will not close and latch on its own from part open.
Hinges
Loose screws, missing screws or worn hinges letting the door drop.
Glazing
Cracked fire glass or missing beads and glazing seals.
Signage
Missing Fire door keep shut signs on communal doors.
Leaf and frame
Splits, kick damage, rot or a frame pulling away from the wall.
Alterations
Old lock holes, cat flaps, letter plates or spy holes that were never fire rated.

What the law asks of a building's fire doors

England's 2022 regulations add set checks for blocks of flats. Scotland and Wales keep the general duty without those checks.

Which law: the Fire Safety (England) Regulations 2022, regulation 10, on top of the Fire Safety Order. (legislation.gov.uk)

How often: communal doors every 3 months and flat entrance doors every 12 months, in blocks over 11m. (gov.uk fact sheet)

Ask for: a record of each door repaired, with before and after photos, the parts used and any refused access. (gov.uk fire door guidance)

Who and when: a competent contractor, as soon as reasonably practicable. (gov.uk fire door guidance)

How a remedial programme usually runs

Whether it is six doors or six hundred, the order is much the same. For blocks, the fire door rules for flats set the checks that start it off.

  • Pricing from the report

    Each door is priced from the inspection report, or from a short survey where the report is thin.

  • Worst doors first

    Closers that fail to latch, big gaps and missing seals come before signs and scuffs.

  • Work to the door's evidence

    Parts of the right rating, fitted the way the door was tested, never a general handyman fix.

  • Records you can show

    Photos, door references and refused-access dates, filed for your fire risk assessor.

Common questions about fire door repairs

Can you repair a fire door, or does it have to be replaced?

Most faults can be repaired: gaps adjusted, seals and strips replaced, closers and hinges renewed. Government guidance says a door does not have to be replaced just because it falls short of current Building Regulations, as long as it still works as a fire door. Replacement is for doors that are badly damaged or were never fire doors.

Do you need to be qualified to repair fire doors?

The government guidance asks for a competent contractor. There is no single licence, so ask the firm which third-party certification scheme audits its fire door work.

How quickly must faults be fixed?

As soon as reasonably practicable, according to the fire door guidance. Doors that would not hold back fire or smoke should be fixed first.

How much do fire door repairs cost?

It depends on the faults. Seals and strips cost far less than a new frame or doorset. See the cost guide and calculator for typical figures.

Where is the building, and who do we contact?

Tell us about the building and its doors

Four details and you are done. Have your fire door survey or inspection report to hand: the firm will want it when they call, because it lets them price the work door by door.

We find a fire door firm working near the building and name that firm to you before a single detail of yours is shared. You pay nothing for this.

Get a quote