Skip to the page
Fire Door Repair Co.Get a quote
Site menu

Fire Door Remedial Works

Turning a fire door survey into finished, recorded repairs: priced door by door, done worst first, and handed back with photos and references.

Get a quote
A dark hallway with two doors and wall lights

Start from the report, not from scratch

Most remedial programmes begin with a document: a fire door survey, the actions on a fire risk assessment, or the results of the quarterly and annual checks. A good report already gives each door a reference, a location and a list of faults. That is enough for a firm to price the work without a second survey.

If the report is thin, for example a single line saying "several flat doors have gaps", expect the firm to ask for a short survey first. It costs less than a quote padded to cover the unknown.

What gets fixed first

Not every fault is equal. A door that will not close on its own is far more dangerous than a missing sign. Ask the firm to sort the work into three groups:

  • Now: closers that do not latch, large gaps, missing or burnt-out seals, doors propped or wedged, broken glazing.
  • Soon: worn hinges, minor gaps, damaged strips, small splits in the leaf.
  • Planned: signage, cosmetic damage, ironmongery that works but is wearing.

The government fire door guidance asks for repairs as soon as reasonably practicable, which in practice means the first group should not wait for the next budget year.

Repairs that keep the door's rating

A fire door is tested as a whole: leaf, frame, glass, seals and ironmongery together. Every repair has to stay within that test evidence, which is why a general handyman is the wrong choice. Typical remedials include:

  • Adjusting or rehanging the leaf to bring the gaps back inside 4mm, or fitting a new lipping.
  • Replacing intumescent strips and smoke seals with the right size and rating.
  • Fitting or adjusting closers so the door shuts and latches from any angle.
  • Renewing hinges, with three on most leaves and fire-rated screws.
  • Reglazing with fire-rated glass, beads and glazing seals.
  • Filling old lock holes and removing non-rated letter plates or spy holes.

BS 8214, the code of practice for timber fire door assemblies, covers how repairs should be made. Where a door cannot be saved, see upgrades and replacements.

The records at the end

The programme is only finished when you can show it. For each door you should get the reference, what was done, the parts used, and photos before and after. Doors where residents refused access need the dates of each attempt. Those records go into your fire safety file and, in higher-risk buildings, the golden thread of building information.

For a block over 11m, the fire door rules for flats explain the regulation 10 checks that will pick up the next round of faults. Prices are on the replacement cost page.

What the rules ask of remedial work

Which law: Fire Safety Order 2005, article 17: doors kept in good repair. (legislation.gov.uk)

How soon: Faults fixed as soon as reasonably practicable. (gov.uk fire door guidance)

Ask for: Door-by-door records with photos and refused-access dates. (regulation 10 records)

Standard: Repairs kept within the door's test evidence, BS 8214. (BSI)

Remedial works: what managing agents ask

What are fire door remedial works?

The repairs and replacements listed in a fire door inspection or survey report. Remedial works close out the actions on the report so each door can be signed off.

Can the firm that did the survey also do the repairs?

Often, yes. Some managing agents prefer a different firm for each, so the person checking the work is not the person who did it. Either is allowed; what matters is the record at the end.

What if residents will not let the firm in?

Record every attempt. Government guidance expects best endeavours for flat entrance doors and a note of refusals, not forced entry.

How long does a remedial programme take?

A small block can be finished in days. Large estates are phased over months, block by block, with the worst doors first.

Where is the building, and who do we contact?

Price your remedial programme

Four details and you are done. Have your fire door survey or inspection report to hand: the firm will want it when they call, because it lets them price the work door by door.

We find a fire door firm working near the building and name that firm to you before a single detail of yours is shared. You pay nothing for this.

Get a quote