Skip to the page
Fire Door Repair Co.Get a quote
Site menu

Fire Door Replacement Cost

What a new fire door costs fitted, what common repairs cost, and a calculator for pricing a whole programme roughly.

Get a quote
A red double door in a brick wall
Low£400simple internal FD30 swap
Typical£900 to £1,250specified FD30 or FD60 doorset with frame
High£1,800+flat entrance or complex doors

Prices as of November 2026. Our estimate from published UK prices, per door fitted and net of VAT; real quotes vary with the building.

Replacement prices by door type

Our estimate of installed prices for a simple like-for-like swap.

DoorFitted priceWhat pushes it up
Internal FD30 door£400 to £700New frame, non-standard size
Internal FD60 door£600 to £1,100Heavier leaf and hardware
Glazed fire door£700 to £1,200+Size and type of fire glass
Flat entrance door£900 to £1,800+Security hardware, smoke seals, certified doorset

Specified doorsets

Our estimate for a specified doorset with lining and basic ironmongery, based on published UK cost data for the third quarter of 2026. Smoke seals add roughly 5 to 15%.

DoorsetPrice per door
FD30 doorset£900 to £1,100
FD60 doorset£1,050 to £1,250
FD30 with glazed vision panel£1,400 to £1,600

Repair prices

Our estimate of supply and fit prices for the repairs that come up most on surveys.

RepairPer door
Intumescent strips and smoke seals£10 to £30
Door closer£25 to £150
Hinges, latch and ironmongery set£50 to £200
New frame£115 to £225
Adjust, rehang or pack the gaps£40 to £80

Why two door quotes differ

  • The fault mix. Adjustments and seals are cheap; frames and leaves are not.
  • Rating and smoke seals. FD60 and smoke-sealed doors cost more than FD30.
  • Glazing, double leaves and odd sizes. All add parts and time.
  • Matching test evidence. Parts must suit the door's certification.
  • Access. Occupied blocks, refused flats and phased work mean return visits.
  • Height. Above 18m, replacements go through the Building Safety Regulator.
  • Volume. Programmes of many doors get a lower rate per door.

Large public programmes show the scale: Haringey Council approved a contract worth up to about £12.3m covering around 5,000 flat entrance doors plus communal doors.

Fire door repair calculator

A rough range for a programme. It uses the published part and door prices on this page and leaves out certification, access problems and VAT.

Typical faults per door

Estimated programme

£2,800 to £5,800

Repairs £1,000 to £2,200. Replacements £1,800 to £3,600.

Before VAT and certification. Typical ranges only.

Get a quote

Asking several firms to price the doors

How the estimates were made: we gathered fitted prices and part costs from UK cost guides and building cost data published in 2026, rounded them, and grouped them by door type. We do not link to firms or quote sites; the links below are the councils and rules referred to on this page.

Give every firm the same survey report and the same access arrangements, and ask for a price per door rather than one lump sum. Ask how they will charge for doors they cannot get into, and what records come with each door. The remedial works page explains what those records should include, and the flats regulations page covers who pays for what.

Sources behind the estimates and rules

Fire door cost questions

How much does it cost to replace a fire door?

Fitted, an internal FD30 door is usually £400 to £700 before VAT, and a flat entrance door £900 to £1,800 or more. Specified doorsets with frame and ironmongery cost more.

Is it cheaper to repair a fire door?

Almost always, where the door can be saved. New seals, a closer or hinges cost a fraction of a new doorset. See the repair prices above.

What about certification and labels?

Firms charge for the paperwork in different ways and no published price exists. Ask for it as a separate line per door.

Do council leaseholder charges reflect the real cost?

Not always. Some councils subsidise flat entrance doors. Hounslow charged leaseholders a flat contribution in 2024/25, well below market price.

Where is the building, and who do we contact?

Turn the range into real prices

Four details and you are done. Have your fire door survey or inspection report to hand: the firm will want it when they call, because it lets them price the work door by door.

We find a fire door firm working near the building and name that firm to you before a single detail of yours is shared. You pay nothing for this.

Get a quote