Read it door by door. Each line should give a reference, location, rating, the faults found and a priority. Fix the doors that would not hold back fire or smoke first, group the rest by type of repair, and send the whole report to firms so they can price each door.
A fire door survey can run to dozens of pages. It is easy to file it and wait for a contractor to tell you what it means. A little time with it first gets you better quotes and a safer building sooner.
What each line should tell you
A good survey has one entry per door. Look for:
- A reference that matches a label on the door or a plan.
- Where it is: block, floor, and whether it is a communal, riser or flat entrance door.
- What it is: rating such as FD30 or FD30S, single or double, glazed or not, and whether any certification was found.
- The faults: gaps, seals, closer, hinges, glazing, signage, damage, alterations.
- A priority and a recommendation: repair, replace or monitor.
- Photos.
If a report lacks references or photos, ask the surveyor for them. Without them a contractor cannot price door by door.
Reading the priorities
Most surveyors use three bands, though the words vary. Treat anything that stops a door closing, latching or sealing as the top band: failed closers, large gaps, missing seals, broken glass, wedges. The government fire door guidance asks for faults to be put right as soon as reasonably practicable, so these should not wait for a later phase.
Turning it into a programme
- Separate repairs from replacements. They are often priced differently and may go to different firms.
- Group repairs by type, so the firm can plan materials: seals, closers, hinges, glazing.
- Mark doors where access is likely to be hard, such as occupied flats.
- Send the full report, not a summary, to each firm you ask to quote.
Blocks of flats and the regular checks
In blocks in England with a top storey over 11m, regulation 10 requires regular checks of communal and flat entrance doors. A survey is often the first full baseline; later checks will compare against it. Keep the survey and the records of repairs together so the next check starts from an accurate list. The rules for flats page sets out the intervals.
Getting it priced
Our remedial works page explains how firms price a programme, and the calculator gives a rough range before quotes arrive. A fire door repair company can then quote from the report itself.